Traffic Light Controller Sequencer AC Voltage Electromagnetic Many Options/Modes 100V-240VAC 50HZ-60HZ and DC Voltage up to 100V DC 3 Channel RED Green Yellow RYG Built-in Indicator LEDs
Traffic Light Controller Sequencer: AC/DC Voltage switching & Electromagnetic with Multiple Options/Modes
• Input Voltage: 100V-240VAC, 50Hz-60Hz
• Relays Switching Voltages: 0…100V DC / 0…240V AC
• Channels: 3 (RED, Green, Yellow - RYG)
• Built-in Indicator LEDs
• AC Voltage Required for Operation
Product Features:
THE IDEAL UNIVERSAL TRAFFIC LIGHT CONTROLLER.
• Device power supply wide input voltage range: 100VAC to 240VAC.
• Independent relay output channels for operating LEDs, incandescent lamps, or any other DC lamp.
• Each relay channel provides 10 Amps of current and can drive full-sized LEDs. It can peak at 1100W with 10 Amps @ 110VAC and 2400W @ 240VAC.
• Highly efficient power conversion, drawing less than 1W from the logic side.
• Onboard LEDs display current output states for easy programming and setup.
• Separate digital control for each of RED, YELLOW, and GREEN allows for realistic operation.
• Compatible with all types of traffic lights, bulbs, DC LED strips, and LEDs.
Product Description:
Our 3 Channel Traffic Light Controller is the ideal solution for all your traffic signal needs. This controller provides 10 Amps of current per relay channel and can drive full-sized LEDs, incandescent traffic lights (including household incandescent and LED bulbs), and various LED strips or DC voltage lamps. The board is equipped with electromagnetic relays.
Programming traffic light timings has never been easier with our controller. It offers 37+ custom sequences that can be easily adjusted using the encoder button.
Efficient Power: This device operates on standard AC voltage and conveniently shares the same input with your AC load or lights. A single AC input powers both the controller board and your lights, eliminating the need for additional connections. Alternatively, you can connect your lights to a battery while the controller still requires AC power to operate.
Device Features:
• Easy mode selection and programming with pushbutton control (encoder).
• Over 37+ unique light sequence modes.
• User-selectable duration ranging from 0 seconds to 255 seconds (depending on the mode).
• Device power supply wide input voltage range: accepts from 100V to 240VAC with input fuse protection for board power supply.
• Universal compatibility for 50Hz and 60Hz AC main voltage.
• Automatic mode memory in case of power loss.
• Easy programming with pushbutton control (encoder).
• 3 seven-segment displays for straightforward programming.
• Onboard LEDs indicate current output states for easy setup.
Device Specification:
• PCB Board Dimensions: 90mm x 100mm, color: green.
• PCB Board Material: 1.6 mm FR-4, with solder mask & silk screen.
• Device power supply voltage: 100VAC to 240VAC (50Hz and 60Hz).
• Delay Range: 0–255 seconds for each color (RED, YELLOW, and GREEN), depending on the mode.
• Input Connector: 14-26AWG, 250VAC @ 16A screw terminals.
• Output Connectors: 14-26AWG, 250VAC @ 16A screw terminals
Related Videos
How to program Manual (on board) Traffic Light / Signal Controller /Sequencer
https://www.youtube.com/watch?v=DP_ajYoRR1o
Programming USA street traffic lights by our controller Mode 16 EMR
https://www.youtube.com/watch?v=zMl0Ex6hkio
Traffic Light Controller Connection EMR Green
https://www.youtube.com/watch?v=85BpxOZd0NE
Traffic Light Controller Easy to change Modes finding Modes/ Even Railroad Mode
https://www.youtube.com/watch?v=MyK3MvU2Ifg
Traffic Light Controller how to make USA traffic mode.
https://www.youtube.com/watch?v=sioPY5nsYRA
Please see below link for manual, specs, mode setups
Traffic Light MODES - https://drive.google.com/open?id=1TqJ1YgKgyyJASmZzuXUKUqjb4fj3ftPk
Device specification - https://drive.google.com/open?id=1ZU2TrePVWbCDewGk0tMx8RjpG_LqwUjv
How to program
https://drive.google.com/open?id=1s8NJsjZZH1iXUvg3lUI-fNb0hYT3bIVX
.png){kind=logo}