PWM MOSFET TRAILING EDGE AC LED LIGHT DIMMER
for controlling via pwm signal
MOSFET is a new light dimmers generation, which are based on the high voltage MOSFET transistors.
MOSFET AC light dimmers are TRAILING EDGE dimmers (also called Reverse Phase dimmers).
MOSFET Trailing Edge AC light dimmers has been designed specially for lighting controlling.
Dimmers are fully compatible with incandescent bulbs and DIMMABLE LED bulbs.
MOSFET Trailing Edge AC light dimmers are the best solution for the incandescent bulbs and DIMMABLE LED bulbs.
Trailing Edge light dimmers has stable dimming at any level without flickering.
MOSFET Trailing Edge AC light dimmers are compatible with all popular Arduino, Raspberry, ESP8266, ESP32, Adafruit boards and all microcontrollers.
Device characteristics :
PCB dimensions: 50mm x 100mm
Mounting holes diameter: 3.2mm
Working voltage 80...240VAC
Output load power - 500 Watt
Device power supply - 5V or 3.3V
Device current - 25mA @ 5V
Compatible for 50Hz and 60Hz AC LINE
Autodetect AC LINE frequency - 50Hz or 60Hz
PWM input signal up to 10kHz
Input voltage level up to VCC (0-3.3V / 0-5V)
50HZ LED - show detected 50Hz AC Line
60HZ LED - show detected 60Hz AC Line
Both LED flashing - when AC Line is not detected
PWR LED - indicate device power
Low voltage side and high voltage side is opto and air isolated
Fully compatible with any MCU, Arduino, Raspberry, ESP8266, ESP32 and other boards
NOT appropriate to change the brightness of fluorescent lamps!
To control LED STRIP, diode rectifier must be connected before AC INPUT
AC LOAD dimming control via trailing edge method
Compatible with TASMOTA
.png){kind=logo}