MPL115A2 Digital Barometer 50 to 115 kPa I2C Mini Module

Freescale’s MPL115A2 employs a MEMS pressure sensor with an I2C interface to provide accurate Pressure/Altitude and Temperature data.

The sensor outputs are digitized by a high resolution 24-bit ADC. It is capable of detecting a change in only 0.05 kPa which equates to a 0.3m change in altitude.

Features

Common applications for the MPL115A2 include:

-personal electronics altimetry,
-weather station equipment,
-navigation and map assist,
-HVAC, etc.
All I2C Mini Modules are designed to operate at 5VDC. Using a convenient 4-Pin plug, devices can be daisy-chained onto the I2C Bus, eliminating the need for soldering. Simply plug together the devices you need for your next automation application.

Pull-up resistors are included with all NCD master devices. If you are wiring in your own I2C port, on-board 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

FREE I2C cable included.

I2C Interface Compatibility
NCD I2C Interface devices are designed to plug in to many popular IoT computing platforms. This allows the “brains” from other manufacturers to directly plug into our devices for easy plug-and-play operation. I2C interface devices use I²C as the underlying communications technology. The notes below will guide you into plugging 3rd party technologies into our devices, we will highlight any adapters that may be required in this section. Please note that all NCD I2C Interface Devices can be chained together to any other Cross-Platform I²C Slave Devices using the I²C Output. Additionally, NCD I2C devices may be plugged into the I2C Output of NCD IoT Interface devices. 

Arduino Interface
Banana Pi Interface
BeagleBone Interface
Bluz Bluetooth Interface
C.H.I.P. Interface
ESP8266 Interface
Particle Interface
Onion Omega 1 & 2 Interface
PyCom Interface
Raspberry Pi Interface
Windows 8/10 PC USB Interface

Community Repositories
https://github.com/ControlEverythingCommunity/MPL115A2
https://github.com/ControlEverythingCom/AnyI2C