Device specification:
PCB size 50mm x 100mm
Working voltage ~100...~120VAC for 60Hz
Output power 200W
Based on Arduino UNO bootloader, MCU ATMEGA328P @ 16.000MHz
USB-COM driver is CH340G
Module voltage 3.3V or 5.0V
Changeable i2c device slave address
Can be connected up to 32 device to the one I2C bus line
Compatible for 50Hz and 60Hz AC Lines
Mini USB socket for programming
Stable work at any dimming level
What need user to start working with this board?
<> Download and install CH340G USB driver
<> Download and install arduino programming software from webpage
<> Connect device to the computer via usb cable for sketch uploading
<> Connect to the i2c master device, which will control the light dimmer
GitHub - https://github.com/krida0electronics/ARDUTEX
I2C Slave Dimmer code - https://drive.google.com/file/d/1jXYHHox6YompxdXUCl4bdbvV_nCxH1Ly/view?usp=sharing
USB device driver CH340G - drive.google.com/file/d/0B6GJokXFb5oENnFMdnhLZ1M2eU0/view?usp=sharing
Driver installation guide - https://drive.google.com/file/d/0B6GJokXFb5oEZXlDbHpJOTZ5YlU/view?usp=sharing
Youtube video #1 - https://youtu.be/e4JSyd2w8wQ
Youtube video #2 - https://youtu.be/MZbbZyjKr08
LOT include:
1x I2C Single Channel Trailing Edge Dimmer