Ac Programmable Light Dimmer Module Controller Board Arduino Raspberry Compatible 50/60hz With HeatSink SSR

Module contains a Triac triggering coupled with zero-cross detector mechanism for programming the intensity of incandescent lamps, AC LED dimmable bulbs, heating elements or fan speed controlled through a micro-controller. 
Working voltage from 110v to 240v.
Auto detect 50Hz or 60Hz.
Zero-Cross detection (with zero/cross output pin SYNC).
Compatible with any ARDUINO, RASPBERRY boards.
Low voltage side and high voltage side is completely isolated.

Dimensions of the PCB 50mm x 50mm (1.97inch x 1.97inch). 
Four mounting holes diameter 3.2mm (0.13inch). 
The distance between mounting holes is 42.7mm. 
Connected LOAD power 500W long-term and 1000W short-term. 
NOT appropriate to change the brightness of fluorescent lamps !!! 
For inductive load controlling must be connected RC snubber - available here !!! 
Warning: This project deals with AC electricity which is dangerous if you don’t know how to treat it safely. 
You must treat electricity with caution! 

Sample Arduino Code 1: https://drive.google.com/open?id=0B6GJokXFb5oEZndCUkNHc181Zms

Sample Android : https://drive.google.com/open?id=0B6GJokXFb5oEVElPS196ODF4U2s

See video : https://youtu.be/Oq6Cnqwbbbg